|
|
 |
Home | ||
|
Products & Services | ||
 |
Grinding Briefs | ||
 |
Machine Briefs | ||
 |
Tech Briefs | ||
 |
How To Briefs | ||
 |
Masonry Briefs | ||
 |
Service Briefs | ||
|
Diamond Machine Tools, Inc. |
||
 |
How To Order |
| 6712 Crawford Ave. Lincolnwood, IL 60712-3587 |
 |
 |
How to square up and true 11A2 and 11V9 diamond wheels on single lip tool and cutter grinders. |
Meteor, Sakazaki, Spinner, etc.
Squaring and trueing can also be done
with a DIT Moly Stick. Mount the DIT
Moly Stick (3/8 x 3) into the tool
compound. First, before using it, expose
the diamond mesh with a Type A dressing
stick. The diamond mesh must be exposed
Soak the Type A (aluminum oxide) dressing stick in water to saturate it. A saturated stick has better action in removing the bond. Plunge the stick straight into the face of the wheel. Then at the rate of .001, true the face of the diamond wheel with the Moly Stick. Depending on how much needs to be re- moved to square up the face, it may be necessary to erode more bond to expose more diamond. For the Moly Stick to pull out and true the face, the diamond mesh must be exposed. After the face is true, dress open the wheel once again so it can grind cool and fast.
|
One of the ways this is
done is to take some
silicon carbide 100 grit
abrasive and, on a flat
surface or lapping plate,
do some figure eight
strokes. After two or
three strokes, index the
diamond wheel one sixth of a turn.
This keeps the wheel square with its
centerline. 
in order for the Moly Stick to pull out the
high diamonds
and true the face.
Get the answers to your